Home / Products
Products
Precision machined components and assemblies produced from castings, forgings, bar stock and fabrications.
Starting material
Castings, forgings, bar stock and fabrications.
Operations
Turning, milling, drilling and tapping, grinding, broaching, honing and assembly.
Volumes
From low-volume service parts to high-volume production programs.
Parts we’ve made
A sample of components machined at our Shelby Township plant. Select a photo to enlarge it.
Four-hole spacer for an automotive transmission application
Link assembly with bushed eyes and threaded studs, zinc plated
Hydraulic slave cylinder: machined casting with milled mounting pad, assembled
Flanged spacer, turned and FNC treated
Slotted lock ring with external tabs
Oil tube with end hole, precision ground
Heavy truck king pin and components kit
Bronze bushings, turned and bored
Turned end cap with tapped center hole
Precision ground pin
Bushing for shackle bolt, with rubber seals assembled on both ends
Ground pin with cross holes and tapped end
Pin with retaining grooves and cross hole
Shackle bolt with broached slots, turned threads, tapped hole for grease fitting and cross hole
Alloy steel clamp plate, 3.2 in. O.D. x 0.500 in. thick with 0.900 in. bore, heat treated complete
Three-lobe mounting flange with tapped center boss
Stepped shaft with flanged head
Alloy steel clamp plate with three counterbored holes
Ground pin with cross hole, grease groove and tapped end
Clutch shaft with external spline and slotted end
Stepped input shaft machined from a forging
Input shaft with external spline
Driver flange with internal spline and bolt circle
Stepped intermediate shaft with slotted end
Long precision-turned output shaft
Ring gear blank with tapped 12-hole bolt circle
Splined stub shaft
Ductile iron housing with machined mounting flange
Cast cover with machined bore and bolt circle
Bored and faced steel ring with bolt holes
Splined flange with bolt circle
Forged stud with turned grooves and thread
Threaded stud with turned shoulder
Turned bushings and sleeves
Bearing housing with pressed-in bearing
Turned and bored sleeve
Stepped pin turned on a lathe
Flanged housing with machined bore
Drilled and tapped steel block
Precision bored sleeve
Stepped shaft
Casting with machined stepped bore
Cast collar with castellated end, machined
Impeller casting with machined hub
Lever arm with machined bore and stud
Forged lever with internal spline
Hardened pins and shaft blanks
Threaded eye bolts
Welded mounting plate with machined boss
Machined bracket casting
Shaft assemblies with welded arms
Flanged hub, turned and bored
Threaded housing
Flanged ring with bolt pattern
Machined housing with threaded bushing
Machined clevis block, zinc plated
Stainless steel pin, precision turned with pointed end and cross hole
Have a print you’d like quoted?
Send us your drawing, annual volume and material. Our team will review it and get back to you.